Get HYDRAULIC CYLINDERS in India

Taiyo General Purpose 35H-3 Series Hydraulic Cylinder

Taiyo General Purpose 35H-3 Series Hydraulic Cylinder Image

Action Style – Double-acting Single-rod/Standard type
Available bores(mm) – φ32/φ40/φ50/φ63/φ80/φ100/φ125/φ160
Mounting Style – SD/LA/LB/FA/FB/CA/CB/TA/TC
Piston Seal – U-seal Slipper seal
Norminal Pressure – 3.5MPa
Max.operating pressure – 4.5MPa
proof Test Pressure – 5MPa
Min.operating pressure – 0.2MPa
Operating Speed Range – 8 to 300mm/s 0.1 to 300mm/s
Operating Temperature – -10 to +80 ºC (But do not use when frozen)
Structure of cushioning – Metal cushion
Working Fluid – Petroleum-based fluid
(In case of the use of other fluids, refer to the table for adaptation of fluids.)
Thread Tolerance – JIS 6g/6H
Stroke Range – φ32/φ40:to 1000mm φ50/φ63:to 1200mm
φ80/φ100:to 1600mm φ125/φ160:to 1800mm

Accessories
Rod End Attachment – 1Rod end eye(T type)/2Rod end clevis with pin(T type)/F joint(F type)
Bracket – CB/TA/TC bracket
Note – Hydraulic pressure that is generated in cylinder due to the internal of load shall be set at less than the maximum allowable pressure.
· The cylinder body is not applied to the cutting oil-proof specifications.
· Conex of boots is the registered trade mark of Teijin, Ltd.
· Slipper seal is the registered trade mark of Japan Bulker Industry Co.

Taiyo General Purpose 35H-3 Series Hydraulic Cylinder

Taiyo General Purpose 35H-3 Series Hydraulic Cylinder Image

Action Style – Double-acting Single-rod/Standard type
Available bores(mm) – φ32/φ40/φ50/φ63/φ80/φ100/φ125/φ160
Mounting Style – SD/LA/LB/FA/FB/CA/CB/TA/TC
Piston Seal – U-seal Slipper seal
Norminal Pressure – 3.5MPa
Max.operating pressure – 4.5MPa
proof Test Pressure – 5MPa
Min.operating pressure – 0.2MPa
Operating Speed Range – 8 to 300mm/s 0.1 to 300mm/s
Operating Temperature – -10 to +80 ºC (But do not use when frozen)
Structure of cushioning – Metal cushion
Working Fluid – Petroleum-based fluid
(In case of the use of other fluids, refer to the table for adaptation of fluids.)
Thread Tolerance – JIS 6g/6H
Stroke Range – φ32/φ40:to 1000mm φ50/φ63:to 1200mm
φ80/φ100:to 1600mm φ125/φ160:to 1800mm

Accessories
Rod End Attachment – 1Rod end eye(T type)/2Rod end clevis with pin(T type)/F joint(F type)
Bracket – CB/TA/TC bracket
Note – Hydraulic pressure that is generated in cylinder due to the internal of load shall be set at less than the maximum allowable pressure.
· The cylinder body is not applied to the cutting oil-proof specifications.
· Conex of boots is the registered trade mark of Teijin, Ltd.
· Slipper seal is the registered trade mark of Japan Bulker Industry Co.