Get HYDRAULIC CYLINDERS in India

Taiyo General Purpose 140L-1 Series Hydraulic Cylinder

Taiyo General Purpose 140L-1 Series Hydraulic Cylinder Image

Available bore size φ63∼φ160 and stroke 200∼3000mm.
Equipped with high-performance cushioning as standard.

The adoption of newly designed cushion valve allows easy cushion adjustment.

The anti-coming-off structure and looseness-preventive lock nut have been adopted as safety measures for the cushion valve.
Adopting O-ring seal for cover and screw-in type tube flange.
The mountings which used are more stiffness than 140H-8 series.

Product Lineup
Structure Double-acting Single-rod
Available Bores(mm) φ63·φ80·φ100·φ125·φ140·φ160
Mounting Style LA·FA·FB·CA·CB·TA·TC
Nominal Pressure 14MPa
Max. Allowable
Pressure
Rod Side A Rod:18MPa B Rod:18MPa
Head Side A Rod:18MPa B Rod:18MPa
Proof Test Pressure 21MPa
Min. Working
Pressure
Rod Side A Rod:0.6MPa and below B Rod:0.45MPa and below
Head Side 0.3MPa and below
Operating Speed Range 20∼200mm/s
Temperature Range -10∼+80ºC (But do not use when frozen)
Structure of Cushioning Metal fitting type
Adaptable Working Oil Petroleum-basedFluid
(For other working oil, refer to the table of working oil adaptability.)
Tolerance of Thread JIS 6g/6H(equivalent to JIS 2 class)
Stroke Tolerance
Accessories Rod Boot Standard:Nylon tarpaulin / Semi-standard:Chloroprene·Conex
Rod End Attachments Rod End Spherical Eye(S type)·Rod End Clevis(Y type)
Others Lock Nut
Note1) Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.
Note2) If using lock nut at the end of piston rod, please order to lengthen the thread length of piston rod end (A dimension).
Note3) Conex of boots is the registered trade mark of Teijin,Ltd.

 

Allowable Fluid, Seal Material
Packing Material Working Fluid
Petroleum-based
Fluid
Water-Glycol
Fluid
Phosphate-Ester
Fluid
Water in Oil
Fluid
Oil in Water
Fluid
1:Nitrile Rubber
2:Urethane rubber
3:Fluoric rubber
6:HNBR
The -marked items are applicable,while the -marked items are inapplicabe. In the case of -marked, please contact to TAIYO service network.
-marked items are the recommended packing materials in case of giving the first priority to abrasion resistance.

Taiyo General Purpose 140L-1 Series Hydraulic Cylinder

Taiyo General Purpose 140L-1 Series Hydraulic Cylinder Image

Available bore size φ63∼φ160 and stroke 200∼3000mm.
Equipped with high-performance cushioning as standard.

The adoption of newly designed cushion valve allows easy cushion adjustment.

The anti-coming-off structure and looseness-preventive lock nut have been adopted as safety measures for the cushion valve.
Adopting O-ring seal for cover and screw-in type tube flange.
The mountings which used are more stiffness than 140H-8 series.

Product Lineup
Structure Double-acting Single-rod
Available Bores(mm) φ63·φ80·φ100·φ125·φ140·φ160
Mounting Style LA·FA·FB·CA·CB·TA·TC
Nominal Pressure 14MPa
Max. Allowable
Pressure
Rod Side A Rod:18MPa B Rod:18MPa
Head Side A Rod:18MPa B Rod:18MPa
Proof Test Pressure 21MPa
Min. Working
Pressure
Rod Side A Rod:0.6MPa and below B Rod:0.45MPa and below
Head Side 0.3MPa and below
Operating Speed Range 20∼200mm/s
Temperature Range -10∼+80ºC (But do not use when frozen)
Structure of Cushioning Metal fitting type
Adaptable Working Oil Petroleum-basedFluid
(For other working oil, refer to the table of working oil adaptability.)
Tolerance of Thread JIS 6g/6H(equivalent to JIS 2 class)
Stroke Tolerance
Accessories Rod Boot Standard:Nylon tarpaulin / Semi-standard:Chloroprene·Conex
Rod End Attachments Rod End Spherical Eye(S type)·Rod End Clevis(Y type)
Others Lock Nut
Note1) Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.
Note2) If using lock nut at the end of piston rod, please order to lengthen the thread length of piston rod end (A dimension).
Note3) Conex of boots is the registered trade mark of Teijin,Ltd.

 

Allowable Fluid, Seal Material
Packing Material Working Fluid
Petroleum-based
Fluid
Water-Glycol
Fluid
Phosphate-Ester
Fluid
Water in Oil
Fluid
Oil in Water
Fluid
1:Nitrile Rubber
2:Urethane rubber
3:Fluoric rubber
6:HNBR
The -marked items are applicable,while the -marked items are inapplicabe. In the case of -marked, please contact to TAIYO service network.
-marked items are the recommended packing materials in case of giving the first priority to abrasion resistance.