Products

2
Yes
None
1
1000000
Name...
/japan-taiyo-cylinders-nambu-japantoyookifemi-italy-nachi-fujjikoshi-japan-oil-skimmers-oil-filtration-machines-coolant-filtration-units/
Thumbnail

Categories:

Sub-Categories:

HYDRAULIC CYLINDERS
HYDRAULIC CYLINDERS
Taiyo Compact 100S-1 Series
Taiyo Compact 100S-1 Series Image

Bore sizes from 20mm to 100mm.

Light weight, compact hydraulic cylinders with bodies constructed of a special aluminum alloy.

Cost-effective selection is available based on frequency of operation and operation pressure.

Rod gland constructed of a special copper alloy for improved wear resistance.

TAIYO 140H-5 Series Hydraulic Cylinder
TAIYO 140H-5 Series Hydraulic Cylinder Image

High-performance cushion

● Double acting hydraulic cylinders for 7/14
MPa with bore from 32 mm to 250 mm.
● High-performance cushion reduces a shock
at stroke-end.
● Newly designed cushion valve allows easy
cushion adjustment.
● The drop prevention mechanism and looseness
preventive lock nut have been adopted as
safety measures for the cushion valve.
● Wide variety of new-type small sensors for
better maintainability.

TAIYO 140H-6 Series Hydraulic Cylinder
TAIYO 140H-6 Series Hydraulic Cylinder Image
Taiyo 2TC40BN425-A0 140H-6 Hydraulic Tie Rod Cylinder 40mm Bore 425mm Stroke
  • Brand: Taiyo
  • Size: Length: 26 in. Width: 5 in. Height: 3 in.
  • Condition: Used
  • Model: 140H-6
  • Country of Manufacture: Japan
  • Consigner: C
  • Items in Lot: 1
  • Lister: rs
  • MPN: 2TC40BN425-A0
  • Weight (lbs, oz): 20,
  • Warehouse Location: L1745
  • Bore: 40mm
  • Stroke: 425mm
  • Rod Diameter: 22.250mm
  • Rod End Type: 20mm-1.5
  • Ports: 3/8″npt
  • Mounting Style: Center Trunnion
  • Action: Double
  • Max Pressure: 140 kgf/cm
  • Cushion: Both Ends
  • Cylinder Head and Cap Material: Steel
  • Cylinder Sleeve Material: Steel
TAIYO 140H-7 Series Hydraulic Cylinder
TAIYO 140H-7 Series Hydraulic Cylinder Image

22mm. DIA. ROD (0.882″)     DOUBLE ACTING CYLINDER    FLANGE MOUNT

TAIYO 210C-1 Series Hydraulic Cylinder
TAIYO 210C-1 Series Hydraulic Cylinder Image
The dimension is compact comparing to 210H-3 Series.
High performance cushioning system works for the smooth stop.
Easy adjustment of cushioning on newly designed cushion valve.
As a safety measure, stopped structure and lock nut for prevent loosing are adopted.
General-purpose Type
Structure Action Style Rod Diameter Bore(mm)
40 50 63 80 100 125 140 160 180 200 224 250
Double-acting Single-rod Basic
210C-1
B rod 210C-11SD40BB100-AB 210C-11SD50BB100-AB 210C-11SD63BB100-AB 210C-11SD80BB100-AB 210C-11SD100BB100-AB 210C-11SD125BB100-AB 210C-11SD140BB100-AB 210C-11SD160BB100-AB 210C-11SD180BB100-AB 210C-11SD200BB100-AB 210C-11SD224BB100-AB 210C-11SD250BB100-AB
A rod 210C-11SD40AB100-AB 210C-11SD40AB100-AB 210C-11SD40AB100-AB 210C-11SD40AB100-AB 210C-11SD40AB100-AB 210C-11SD40AB100-AB 210C-11SD40AB100-AB 210C-11SD40AB100-AB
Switch Set
210C-1R
B rod 210C-1R1SD40BB100-ABAH2 210C-1R1SD50BB100-ABAH2 210C-1R1SD63BB100-ABAH2 210C-1R1SD80BB100-ABAH2
A rod 210C-1R1SD40AB100-ABAH2 210C-1R1SD50AB100-ABAH2 210C-1R1SD63AB100-ABAH2 210C-1R1SD80AB100-ABAH2
Double-acting Double-rod Basic
210C-1D
B rod 210C-1D1SD40BB100-AB 210C-1D1SD50BB100-AB 210C-1D1SD63BB100-AB 210C-1D1SD80BB100-AB 210C-1D1SD100BB100-AB 210C-1D1SD125BB100-AB 210C-1D1SD140BB100-AB 210C-1D1SD160BB100-AB
Note) Please click the Series Name when you need to review the details of each series.
TAIYO 210H-3 Series Hydraulic Cylinder
TAIYO 210H-3 Series Hydraulic Cylinder Image

Discontinued product

21MPa Hydraulic Cylinder 210H-3 Series

  • The regarding performance and installation dimension is governed by and construed under JOHS of Japan Fluid Power Industries Association.
Product Lineup
Structure Models Rod Dia. Bore mm
40 50 63 80 100 125 140 160
Double-acting
Single-rod
Standard B Rod 210H-31SD40BB100 210H-31SD50BB100 210H-31SD63BB100 210H-31SD80BB100 210H-31SD100BB100 210H-31SD125BB100 210H-31SD140BB100 210H-31SD160BB100

 

Models Double-acting Single-rod/Standard
Cylinder Bore φ40,φ50,φ63,φ80,φ100,φ125,φ140,φ160
Mounting Style SD,LA,FA,FB,CA,CB,TA,TC
Rod Type B Rod
Norminal Pressure 21MPa
Max. Working Pressure Rod Side:26.5MPa Head Side:24.5MPa
Proof Test Pressure 31.5MPa
Min. Operating Pressure Rod Side: less than 0.45MPa Head Side: less than 0.3MPa
Operating Speed Range 8 to 300mm/s(Not including Cushion)
Operating Temperature -10 to +80 Celsius Degree (But do not use when frozen)
Cushion Mechanism Metal fitting system
Working Fluid Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.)
Thread Tolerance JIS 6g/6H
Stroke Tolerance
Accessories Boots Standard : Nylon tarpaulin Semi-standard : Chloropaulin/Conex
Rod End Attachment Rod End Eye(T type)/Rod End Clevis(Y type)
Others Lock Nut

 

Note1Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.Note2Please order longer dimension A of rod end threaded part if you use with lock nut.Note3Conex of boots is the registered trade mark of Teijin,Ltd.

Allowable Fluid, Seal Material
Seal Material Allowable Fluid
Petroleum-based
Fluid
Water-Glycol
Fluid
Phosphate-Ester
Fluid
Water in Oil
Fluid
Oil in Water
Fluid
1:Nitrile rubber
2:Urethan rubber
3:Fluoric rubber
6:HNBR

 

Note1The  marked items are applicable, while marked items are inapplicable. Please contact to us when you use marked items.

Note2The  marked items are the recommended packing materials in case of the first priority to abrasion resistance.

TAIYO Mill Type 70M-3 Series Hydraulic Cylinder
TAIYO Mill Type 70M-3 Series Hydraulic Cylinder Image
Special designed for heavy duty machinery such as steelmaking equipment.
High-strength designed for resistes pressure surges, vibrations, and impact.
High-performance cylinder which manufactured with great care regarding processing accuracy, surface treatment, seal packing materials, etc.
High-accuracy technical designed for special applications.
Conform to Japan Fluid-Power Association (JFPA) JOHS-110 standard

 

Specifications
Action Style Double-acting Single-rod
Available Bore φ40·φ50·φ63·φ85·φ100·φ125·φ140·φ160·φ180·φ200·φ224·φ250
Mounting Style SD·LA·FA·FB·CA·CB(with Pin)·TC
Norminal Pressure 7MPa
Max. Working Pressure 14MPa
Proof Test Pressure 17MPa
Min. Working Pressure φ40∼φ140:0.3MPa φ160∼φ250:0.5MPa
Operating Speed Range φ40∼φ140:10∼500mm/s φ160∼φ250:20∼500mm/s
Operating Temperature -10∼+80 Celsius Degree(But do not use when frozen)
Cushion Mechanism Metal fitting type
Painting Color Munsell 7.5BG 5.5/2.5
Working Fluid Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.)
Thread Tolerance JIS 6g/6H
Stroke Tolerance
Accessories Boots Standard:Nylon tarpaulin Semi-standard:Chloroprene·Conex
Rod End Attachment Rod End Spherical Eye(S type)·Rod End Clevis(Y type)
Others Rod End Lock Nut
Note1) Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.
Note2) Conex of boots is the registered trade mark of Teijin,Ltd.
TAIYO 140M-3 Mill Type Hydraulic Cylinder
TAIYO 140M-3 Mill Type Hydraulic Cylinder Image

Special designed for heavy duty machinery such as steelmaking equipment.
High-strength designed for resistes pressure surges, vibrations, and impact.

High-performance cylinder which manufactured with great care regarding processing accuracy, surface treatment, seal packing materials, etc.
High-accuracy technical designed for special applications.
Conform to Japan Fluid-Power Association (JFPA) JOHS-110 standard.

Specifications
Action Style Double-acting Single-rod
Available Bores(mm) φ40·φ50·φ63·φ85·φ100·
φ125·φ140
φ160·φ180·φ200·φ224·φ250
Standard Stroke 100∼1500mm 100∼2000mm
Mounting Style SD·LA·FA·TC
Nominal Pressure 14MPa
Max. AllowablePressure 23MPa
Proof Test Pressure 28MPa
Max. Working Pressure 500mm/s
Min. Working Pressure 10mm/s 20mm/s
Temperature Range -5∼+65ºC(But do not use when frozen)
Structure of Cushioning Metal fitting type
Working Fluid Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.)
Tolerance of Thread JIS 6g
TAIYO 35SY-1R Series Hydraulic Cylinder
TAIYO 35SY-1R Series Hydraulic Cylinder Image

3.5Mpa Compact Hydraulic Cylinder

TAIYO 70Y-2 Series Hydraulic Cylinder
TAIYO 70Y-2 Series Hydraulic Cylinder Image

Basic Information

Nominal Pressure 7MPa Cylinder Type Standard Rod Motion Double Acting Piece Rod
Specifications TMS Standard Additional Function No Piston Packing Material NBR
TAIYO 35P-3 Series Position Detecting Hydraulic Cylinder
TAIYO 35P-3 Series Position Detecting Hydraulic Cylinder Image

Basic Information

Nominal Pressure 3.5MPa Cylinder Type Standard Rod Motion Double Acting Piece Rod
Piston Material Steel Additional Function Rod Position Detection

 

TAIYO 70P-8 Series Position Detecting Hydraulic Cylinder
TAIYO 70P-8 Series Position Detecting Hydraulic Cylinder Image

Basic Information

Nominal Pressure 14MPa Cylinder Type Standard Rod Motion Double Acting Piece Rod
Additional Function Rod Position Detection
TAIYO 140P-8 Series Position Detecting Hydraulic Cylinder
TAIYO 140P-8 Series Position Detecting Hydraulic Cylinder Image
Equipped with high-performance cushioning as standard.
Easy to adjust cushion by adopted new designed cushion valve.
High-accuracy position control and position detection can be performed by connecting to a computer or electric counter.
High-accuracy length measuring can be performed by adopting permanent magnet at the length measuring roller.
Resolution Ability : 0.1mm/PulseB

 

TAIYO 70T-2 Series Telesscopic Hydraulic Cylinder
TAIYO 70T-2 Series Telesscopic Hydraulic Cylinder Image

7MPa Double-acting Non-constant Speed 2 Stage Telescopic Cylinder.

2-Stage Telescopic design offer space saving for vertical axis mounting.
Fixed cushions are standard at both stroke end.
Uniform circuit structure provide sequence operated by uniform motion.

Specifications
Action Style 10 20 30 40 50
Available Bores(mm) 1-stage φ63 φ90 φ110 φ125 φ140
2-stage φ45 φ65 φ80 φ90 φ100
Stroke Fabrication Range 50 to 1700mm 50 to 2500mm 50 to 3100mm 50 to 3100mm 50 to 3100mm
Norminal Pressure 7MPa
Max. Allowable Pressure Rod Cover Side : 15MPa Head Cover Side : 9MPa
Proof Test Pressure Rod Cover Side : 21MPa Head Cover Side : 14MPa
Min. Working Pressure Rod Cover Side : 0.6MPa Head Cover Side : 0.3MPa
Operating Speed Range 10 to 166mm/s 10 to 150mm/s 10 to 140mm/s 10 to 128mm/s 10 to 118mm/s
Operating Temperature Ambient Temperature : -10 to +50ºC Oil Temperature : -5 to +80ºC
(But do not use when frozen)
Cushion Mechanism Fixed Cushion on Both End
Working Fluid Petroleum-based fluid
(For other working oil, refer to the tableof working oil adaptability.)
Thread Tolerance JIS 6g/6H
Stroke Tolerance
Mounting Style LA,LT,FA,FB,CA,TA,TB

Hydraulic pressure that is generated in cylinder dur to the inertia of load shall be set at less than the maximum allowable pressure.
When using in case of retract, set the working pressure up to 6Mpa as measure.
If the working speed is below the speed range, the cylinder would get stick-slip or get stuck. And if the working speed is cut cross the speed range, the packing will get early abrasion and it will also reduce the effectiveness of the cushion.

TAIYO TTC-1 Series Telesscopic Hydraulic Cylinder
TAIYO TTC-1 Series Telesscopic Hydraulic Cylinder Image
Specifications
Model 15Œ` 31Œ` 47Œ` 61Œ` 77Œ` 100Œ` 127Œ` 173Œ` 245Œ`
Available Bores(mm) mm 63 90 110 125 140 160 180 210 250
Standard Stroke
»ì”͈Í
50∼
2900mm
50∼
4400mm
50∼
4800mm
50∼
5100mm
50∼
5400mm
50∼
5900mm
50∼
6800mm
50∼
7700mm
50∼
8900mm
Mounting Style LA·FA·FB·CA·TA·TBŒ`
Nominal Pressure 10MPa
Max. AllowablePressure Head Side:10MPa
Proof Test Pressure Head Side:14MPa
Min. WorkingPressure 0.3MPa
Operating Speed Range 20∼333mm/s 20∼300mm/s 210∼280mm/s 20∼250mm/s 20∼220mm/s
Temperature Range ŽüˆÍ‰·“x:-10∼+50ºC –û‰·:-5∼+80ºC(But do not use when frozen)
Structure of Cushioning —¼‘¤ŒÅ’èƒNƒbƒVƒ‡ƒ“
Working Fluid Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.)
Tolerance of Thread JIS 6g/6H
Stroke Tolerance
TAIYO 70H-7 Series Hydraulic Cylinder
TAIYO 70H-7 Series Hydraulic Cylinder Image

7Mpa Double-acting Hydraulic Cylinder

TAIYO 70H-6 Series Hydraulic Cylinder
TAIYO 70H-6 Series Hydraulic Cylinder Image

7Mpa Double-acting Hydraulic Cylinder

Taiyo Compact 35S-1 Series
Contact Us
Taiyo Compact 35S-1 Series Image

Hydrogenated nitrile rubber is standardized for slipping parts packing material.
Available in male and female rod ends.
Square ring type piston packing is adopted.
Easy maintenance design.


Magnetic proximity switch is standardized.

Taiyo Compac HQS2 Series
Taiyo Compac HQS2 Series Image

Compact design and light weight which realized by applied Special Aluminum Alloy to the cylinder body.

Enhanced your cost performance by selection depend on frequency of use and operating pressure.

AX, AZ type switches are common for the most of our standard product.

The material of gland bush is friction-resistant Special Copper Alloy.

Taiyo Compact 210S-1 Series
Taiyo Compact 210S-1 Series Image

Industry-leading compact demensions comparing to equivalent products. Sufficient strength and high-performance verified by fatigue testing and endurance testing.

Adopting the standard AX, AZ switch which is superior in maintenance.

Switch temperature resistance has been improved up to 100 degree celsius. (only at model : AX125, AZ125)

Installation pitch is totally same as 100S-1 and 160S-1 Series. (Stroke Axis Length is different)

 

Taiyo Compact 160S-1 Series
Taiyo Compact 160S-1 Series Image

Operates up to 10 million times at a maximum of 16 Mpa
Abrasion resistant hydrogenated nitrile rubber packing is standardized.
Standard type cylinders are fully operable at ambient temperatures of up to 120 Celsius.
Introducing special copper alloy for Rod gland.
Sliding type switches allow flexible switch placement.

Taiyo Compact 210N-1 Series
Taiyo 35Z Hydraulic Cylinder
Taiyo 35Z Hydraulic Cylinder Image

Action Style – Double-acting Single-rod/Basic
Available Bores(mm) – φ20,φ25,φ32
Mounting Style – SD/LB/FA/FB/CA/CB
Norminal Pressure – 3.5MPa
Max. Working Pressure – 4MPa
Proof Test Pressure – 5MPa
Operating Speed Range – 0.1 to 300mm/s
Operating Temperature – 10 to +70 ºC(But do not use when frozen)
Cushion Mechanism – None
Working Fluid – Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.)
Thread Tolerance – JIS 6g/6H
Standard Stroke φ20 : to 400mm φ25 : to 500mm φ32 : to 600mm
Stroke Tolerance

Accessories
Rod End Attachment – Rod End Spherical Eye(S type)/Rod End Clevis(Y type)/F Joint
Bracket – CB Bracket

Taiyo General Purpose 35H-3 Series Hydraulic Cylinder
Taiyo General Purpose 35H-3 Series Hydraulic Cylinder Image

Action Style – Double-acting Single-rod/Standard type
Available bores(mm) – φ32/φ40/φ50/φ63/φ80/φ100/φ125/φ160
Mounting Style – SD/LA/LB/FA/FB/CA/CB/TA/TC
Piston Seal – U-seal Slipper seal
Norminal Pressure – 3.5MPa
Max.operating pressure – 4.5MPa
proof Test Pressure – 5MPa
Min.operating pressure – 0.2MPa
Operating Speed Range – 8 to 300mm/s 0.1 to 300mm/s
Operating Temperature – -10 to +80 ºC (But do not use when frozen)
Structure of cushioning – Metal cushion
Working Fluid – Petroleum-based fluid
(In case of the use of other fluids, refer to the table for adaptation of fluids.)
Thread Tolerance – JIS 6g/6H
Stroke Range – φ32/φ40:to 1000mm φ50/φ63:to 1200mm
φ80/φ100:to 1600mm φ125/φ160:to 1800mm

Accessories
Rod End Attachment – 1Rod end eye(T type)/2Rod end clevis with pin(T type)/F joint(F type)
Bracket – CB/TA/TC bracket
Note – Hydraulic pressure that is generated in cylinder due to the internal of load shall be set at less than the maximum allowable pressure.
· The cylinder body is not applied to the cutting oil-proof specifications.
· Conex of boots is the registered trade mark of Teijin, Ltd.
· Slipper seal is the registered trade mark of Japan Bulker Industry Co.

Taiyo 100Z Series Hydraulic Cylinder
Taiyo 100Z Series Hydraulic Cylinder Image

Action Style – Double-acting Single-rod/Basic
Available Bores(mm) – φ20,φ25,φ32
Mounting Style – SD/LB/FA/CA
Norminal Pressure – 10MPa
Max. Allowable Pressure – 12MPa
Proof Test Pressure – 15MPa
Min. Operating Pressure less than – 0.3MPa
Operating Speed Range – 8 to 500mm/s(Not Including Cushion Parts)
(Without Cushion 8 to 100mm/a)

Operating Temperature
(Ambient Temperature and Oil Temperature) -10 to +80 ºC(But do no use when frozen)
Cushion Mechanism Metal fitting system(Floating Cushion)
Working Fluid Petroleum-based fluid
(For other working oil, refer to the table of working oil adaptability.)
Thread Tolerance – JIS 6g/6H
Standard Stroke – φ20 : to 800mm φ25 : to 800mm φ32 : to 850mm
Stroke Tolerance
Accessories
Rod End Attachment – Rod End Eye(T type)/Rod End Clevis(Y type) /F Joint (F Type)

Taiyo General Purpose 70H-8 Series Hydraulic Cylinder
Taiyo General Purpose 70H-8 Series Hydraulic Cylinder Image

The adoption of high-performance cushion has reduced the shock at stopping.
The adoption of newly designed cushion valve allows easy cushion adjustment.

The anti-coming-off structure and looseness-preventive lock nut have been adopted as safety measures for the cushion valve.
Standardized new-type small switch in varieties with the improved maintenance.

Taiyo General Purpose 100H-2 Series Hydraulic Cylinder
Taiyo General Purpose 100H-2 Series Hydraulic Cylinder Image

Designed to ISO 10762 cylinder.(Conforming to JIS B8367-5)
Adoption of floating cushion allows smooth start.
High-performance cushion.
Packing grooves in sliding sections conform to ISO standards.

Taiyo General Purpose 140L-1 Series Hydraulic Cylinder
Taiyo General Purpose 140L-1 Series Hydraulic Cylinder Image

Available bore size φ63∼φ160 and stroke 200∼3000mm.
Equipped with high-performance cushioning as standard.

The adoption of newly designed cushion valve allows easy cushion adjustment.

The anti-coming-off structure and looseness-preventive lock nut have been adopted as safety measures for the cushion valve.
Adopting O-ring seal for cover and screw-in type tube flange.
The mountings which used are more stiffness than 140H-8 series.

Product Lineup
Structure Double-acting Single-rod
Available Bores(mm) φ63·φ80·φ100·φ125·φ140·φ160
Mounting Style LA·FA·FB·CA·CB·TA·TC
Nominal Pressure 14MPa
Max. Allowable
Pressure
Rod Side A Rod:18MPa B Rod:18MPa
Head Side A Rod:18MPa B Rod:18MPa
Proof Test Pressure 21MPa
Min. Working
Pressure
Rod Side A Rod:0.6MPa and below B Rod:0.45MPa and below
Head Side 0.3MPa and below
Operating Speed Range 20∼200mm/s
Temperature Range -10∼+80ºC (But do not use when frozen)
Structure of Cushioning Metal fitting type
Adaptable Working Oil Petroleum-basedFluid
(For other working oil, refer to the table of working oil adaptability.)
Tolerance of Thread JIS 6g/6H(equivalent to JIS 2 class)
Stroke Tolerance
Accessories Rod Boot Standard:Nylon tarpaulin / Semi-standard:Chloroprene·Conex
Rod End Attachments Rod End Spherical Eye(S type)·Rod End Clevis(Y type)
Others Lock Nut
Note1) Hydraulic pressure that is generated in cylinder due to the inertia of load shall be set at less than the maximum allowable pressure.
Note2) If using lock nut at the end of piston rod, please order to lengthen the thread length of piston rod end (A dimension).
Note3) Conex of boots is the registered trade mark of Teijin,Ltd.

 

Allowable Fluid, Seal Material
Packing Material Working Fluid
Petroleum-based
Fluid
Water-Glycol
Fluid
Phosphate-Ester
Fluid
Water in Oil
Fluid
Oil in Water
Fluid
1:Nitrile Rubber
2:Urethane rubber
3:Fluoric rubber
6:HNBR
The -marked items are applicable,while the -marked items are inapplicabe. In the case of -marked, please contact to TAIYO service network.
-marked items are the recommended packing materials in case of giving the first priority to abrasion resistance.
Taiyo General Purpose 140H-8 Series Hydraulic Cylinder
Taiyo General Purpose 140H-8 Series Hydraulic Cylinder Image
Action Style Double-Acting Single-rod/Standardl type
Available Bores(mm) φ32/φ40/φ50/φ63/φ80/φ100/φ125/
φ140/φ150/φ160/φ180/φ200/φ224/φ250
Mounting Style SD/LA/LC/FY/FE/FZ/FC/FD/FK/CA/CS/CB/TA/TC
Rod Dia. Type B C A
Nominal Pressure 14MPa
Max. Allowable Pressure Rod Side 18MPa 14MPa 18MPa
Head Side 18MPa
Proof Test Pressure 21MPa
Min. Working Pressure Rod Side 0.45MPa 0.4MPa 0.6MPa
Head Side 0.3MPa
Operating Speed Range φ32 toφ63:8 to 400mm/s φ80 to φ125:8 to 300mm/s φ140 to φ250:8 to 200mm/s
Temperature Range -10 to +8 ºC (But do not use wnen frozen)
Structure of Cushioning Metal fitting type
Adaptable Working Oil Petroleum-based fluid
(In case of the use of other fluids, refer to the table for adaptation of fluids.)
Tolerance of Thread JIS 6g/6H
Standard Stroke φ32 to φ50: to 1200mm φ63/φ80: to 1600mm φ100 to φ250: to 2000mm
Stroke Tolerance
Accessories Rod End Attachments 1Rod end eye(Ttype)/1Rod end spherical eye(Stype)/
2Rod end clevis with pin(Ttype)/F joint(Ftype)
Rod Boot Standard:Nylon tarpaulin Semi-standard:Chloroprene Conex
Others Lock nut
Alloawable Fluid, Seal Material
Seal Material Aloowable Fluid
Petroleum-based Fluid Water-Glycol Fluid Phoshate-Ester Fluid Water in Oil Fluid Oil in Water Fluid
1: Nitile Rubber
2: Urethane Rubber
3: Fluoric Rubber
6: HNBR
Note1) The  and -marked items are applicable, while the -marked items are inapplicable.
Note2) The -marked items are the recommended packing materials in case of giving the first priority to abrasion
Taiyo General Purpose 160H-1 Series Hydraulic Cylinder
Taiyo General Purpose 160H-1 Series Hydraulic Cylinder Image
Desigend to ISO 6020-2/JIS B8367-2 cylinder.
New floating cushion provides effective cushioning and quick start of each stroke.
Switches can be used to all bore sizes in standard.
Standardizing high performance cushion.
Seals in slideing sections were designed to ISO standard.
Product Lineup
General Type
Structure Action Style Rod Diameter Bore(mm)
32 40 50 63 80 100 125 140 160
Double-acting Single-rod Basic
160H-1
B rod 160H-11SD32BB100-AB 160H-11SD40BB100-AB 160H-11SD50BB100-AB 160H-11SD63BB100-AB 160H-11SD100BB100-AB 160H-11SD125BB100-AB 160H-11SD140BB100-AB 160H-11SD160BB100-AB
A rod 160H-11SD40AB100-AB 160H-11SD50AB100-AB 160H-11SD63AB100-AB 160H-11SD80AB100-AB 160H-11SD100AB100-AB 160H-11SD125AB100-AB
Switch Set
160H-1R
B rod 160H-1R1SD32BB100-ABAH2 160H-1R1SD40BB100-ABAH2 160H-1R1SD50BB100-ABAH2 160H-1R1SD63BB100-ABAH2 160H-1R1SD80BB100-ABAH2 160H-1R1SD100BB100-ABAH2 160H-1R1SD125BB100-ABAH2 160H-1R1SD140BB100-ABAH2 160H-1R1SD160BB100-ABAH2
A rod 160H-1R1SD40AB100-ABAH2 160H-1R1SD50AB100-ABAH2 160H-1R1SD63AB100-ABAH2 160H-1R1SD80AB100-ABAH2 160H-1R1SD100AB100-ABAH2 160H-1R1SD125AB100-ABAH2
Double-acting Double-rod Basic
160H-1D
B rod 160H-1D1SD32BB100-AB 160H-1D1SD40BB100-AB 160H-1D1SD50BB100-AB 160H-1D1SD63BB100-AB 160H-1D1SD80BB100-AB 160H-1D1SD100BB100-AB 160H-1D1SD125BB100-AB 160H-1D1SD140BB100-AB 160H-1D1SD160BB100-AB
Switch Set
160H-1RD
B rod 160H-1RD1SD32BB100-ABAH2 160H-1RD1SD40BB100-ABAH2 160H-1RD1SD50BB100-ABAH2 160H-1RD1SD63BB100-ABAH2 160H-1RD1SD80BB100-ABAH2 160H-1RD1SD100BB100-ABAH2 160H-1RD1SD125BB100-ABAH2 160H-1RD1SD140BB100-ABAH2 160H-1RD1SD160BB100-ABAH2
Note) Please click the Series Name when you need to review the details of each series.
 Cutting Oil Proof Type
Structure Action Style Rod Diameter Bore(mm)
32 40 50 63 80 100 125 140 160
Double-acting Single-rod Basic
160HW-1
B rod 160HW-11SD32BB100-AB 160HW-11SD40BB100-AB 160HW-11SD50BB100-AB 160HW-11SD63BB100-AB 160HW-11SD80BB100-AB
Switch Set
160HW-1R
B rod 160HW-1R1SD32BB100-ABRA2 160HW-1R1SD40BB100-ABRA2 160HW-1R1SD50BB100-ABRA2 160HW-1R1SD63BB100-ABRA2 160HW-1R1SD80BB100-ABRA2
Note) Please click the Series Name when you need to review the details of each series.
TAIYO 70H-5 Series hydraulic cylinder
TAIYO 70H-5 Series hydraulic cylinder Image

Standard built-in highperformance
cushion in hydraulic
cylinders
● Double acting hydraulic cylinders for 7/14 MPa with a
bore from φ32 to φ250.
● The adoption of high-performance cushion has
reduced a shock at stopping.
● The adoption of newly designed cushion valve allows
easy cushion adjustment.
● The anti-coming-off structure and loosenesspreventive
lock nut have been adopted as safety
measures for the cushion valve.
● Standardized new-type small switch in varieties with
the improved maintenance.

Direct Press DP Series Cylinder
Direct Press DP Series Cylinder Image

It could puncture round hole and square hole without any guide.
The external size is samll, so it could saving space for lined up installation.
It could setting the punch directly on the rod end.
The length of stroke is possible to puncture depth concave under face.

Product Lineup
Action Style Bore
(mm)
Stroke(mm)
30 50 75 100 125 150
Basic
DPR
φ26 DPR26-030 DPR26-050 DPR26-075 DPR26-100 DPR26-125 DPR26-150
φ40 DPR40-030 DPR40-050 DPR40-075 DPR40-100 DPR40-125 DPR40-150
φ50 DPR50-030 DPR50-050 DPR50-075 DPR50-100 DPR50-125 DPR50-150
With Non-rotating
DPS
φ40 DPS40-030 DPS40-050 DPS40-075 DPS40-100 DPS40-125 DPS40-150
φ50 DPS50-030 DPS50-050 DPS50-075 DPS50-100 DPS50-125 DPS50-150
Specifications
Action Style Basic With Non-rotating
Model Numbers DPR DPS
Aailable Bores(mm) φ26,φ40,φ50 φ40,φ50
Cylinder Stroke 30/50/75/100/125/150mm 30/50/75/100/125/150mm
Max. Allowable Pressure 14MPa
Min. Working Pressure 0.6MPa
Operating Temperature -10 to +80 Celsius Degree(But do not use when frozen)
When using exceeds this temperature, the gaskets are damaged.
Working Fluid Petroleum-based fluid
Note1)Rot End Run-out less than 0.05mm less than 0.03mm
Remarks Rotation Run-out/less than 0.03mm
(The run-out of rod diameter when rotate without load.)
Rotation Angle/less than 0.3 Degree
(Without Torque)
Adjustment Round Hole Square Hole/Different Diameter Hole
Accessories One set screw for retainer-nut. One set screw for retainer-nut.
/One Spring Pin

Note1)One-side run-out of 1kgf horizontal load on the rod end.

HYDRAULIC PUMPS
NACHI PVD Series Piston Hydraulic Pump
NACHI PVD Series Piston Hydraulic Pump Image

One pump discharges two equal amounts of flow to ensure shovel straightness.
Constant horsepower control with full use of engine horsepower, resulting in increased speed and power for mother machine.
Compact size enables installation in a small engine room

NACHI PVK Series Piston Pump
NACHI PVK Series Piston Pump Image

Constant horsepower control with full use of engine horsepower, resulting in increased speed and power for mother machine.
Load sensing control can be achieved with our DPK load sensing valve, resulting in energy savings for mother machine.
Compact size enables installation in a small engine room.

NACHI PZ Series Piston Hydraulic Pump
NACHI PZ Series Piston Hydraulic Pump Image

Half-cylindrical swash plate and 11 pistons for low noise and low pulsation
Spherical valve plate for high efficiency
(Employed into 3B, 4B and 6B.)
Various capacities ranging from 35 to 220cm3/rev
(7 sizes in total)
Multiple string option with our IPH series inscribed gear pump.
The electro-hydraulic propotional control valve uses the proven force feed-back system for improved hysteresis, repeatability, and response.

NACHI PVS Series Piston Hydraulic Pump
NACHI PVS Series Piston Hydraulic Pump Image

Half-cylindrical swash plate for low noise and low pulsation
Rich set of options to enable highly efficient, energy-saving equipment.

NACHI PZS Series Piston Hydraulic Pump
NACHI PZS Series Piston Hydraulic Pump Image

Half-cylindrical swash plate and 11 pistons for low noise and low pulsation
Spherical valve plate for high efficiency
Multiple string option with our IPH series inscribed gear pump.

NACHI UVN Series Unipump Hydraulic Pump
NACHI UVN Series Unipump Hydraulic Pump Image

Enhanced hydraulic pump and electromotor efficiency for decreased electric consumption (Electric motor IE3 premium efficiency compatible)

Compact size for space-saving unit design
Original connection method between pump and electromotor shaft for low noise and long life

NACHI Hydraulic Vane Pump
NACHI Hydraulic Vane Pump Image

The Nachi VDR series of vane pumps offer quick responsiveness and efficiency while operating at high pressures up to 14MPa. Nachi hydraulic components are known for precision construction, durability and ability to tolerate tough operating conditions. Minimal power loss and quiet operation with little vibration. Best uses include in industrial machines, machine tools and mobile hydraulics systems for vehicles.

HYDRAULIC VALVES
NACHI SE / SED-G01-40 SERIES VALVES
NACHI SE / SED-G01-40 SERIES VALVES Image

Realizes maximum working pressure, maximum flow, and allowed back pressure for the 5W class
Maximum pressure – 16MPa
Maximum flow  – 40L/min
Permissible back pressure – 16MPa
CE Approval
We have prepared a terminal box/DIN connector wiring product and a connector (M12-4 pin connector) wiring product, so selection using the formal auxiliary symbol is possible.
Surge-less Circuit is standard equipment
The connector wiring product can be directly connected to a wire-saving system such as Device Net, etc.

G03 Modular Valve Series
G03 Modular Valve Series Image

High pressure and large capacity
Maximum working pressure: 25,35 MPa
Maximum flow: 100 L/min
Stacking system and bolt detaching system allows circuits to be configured, changed and added easily and immediately.
Compact size for reduced space
Decrease noise and vibration due to reduced pipings
Various series and models; G03 size has 52 series and 96 models

NACHI G01 Modular Valve Series VALVES
NACHI G01 Modular Valve Series VALVES Image

High pressure and large capacity
Maximum working pressure: 25,35 MPa
Maximum flow: 50 L/min
Stacking system and bolt detaching system allows circuits to be configured, changed and added easily and immediately.
Compact size for reduced space
Decrease noise and vibration due to reduced pipings
Various series and models; G01 size has 58 series and 131 models

NACHI Non Drain Type Pressure Switch Modular VALVES
NACHI Non Drain Type Pressure Switch Modular VALVES Image

No drain flow for energy-saving operation.
Can achieve highly responsive, high-accuracy switch output.
Long life for enhanced reliability
With electric trimmer, pressure and hysteresis can be freely changed within adjustment range.
Photo coupler electrically isolates switch output from internal circuit, preventing misoperation due to noise.

NACHI SL Pressure Switch Modular VALVES
NACHI SL Pressure Switch Modular VALVES Image

Modular Valve with a switch that opens/closes electric circuits upon sensing a pressure change in hydraulic circuits.
Built-in indicator light in DIN connector, which enables a visual check of operation.
W type with both A and B port controls results in compact equipment.

NACHI SL Series Wet Solenoid Valve (SL-G01) VALVES
NACHI SL Series Wet Solenoid Valve (SL-G01) VALVES Image

Highly reliable wet solenoid structure.
Terminal box type for easy wiring.
It operates on the low power consumption of 10W.
With the AC type, the total length of the valve is compactly designed.
CE,UL,CSA certification.

NACHI SE Series Low Power Solenoid Valve (SE-G01) VALVES
NACHI SE Series Low Power Solenoid Valve (SE-G01) VALVES Image

The amount of power consumed by solenoids has been extremely small.
(DC24V:4.8w)
They operate with a low electrical current so they can be driven directly with the output circuit of the PC (programmable controller).
They are low power so little heat is emitted from the coil, and there is less heat impact on machinery than before.
The M12-4 pin connector attachment makes the interface with open networks such as Device Net, etc. easy, and in order to protect the points of contact with the slave units it is built into the diode for preventing reverse voltage in the solenoid.

NACHI Non Leak Type Solenoid Valve (SNH-G01 , SNH-G03 , SNH-G04 , SNH-G06) VALVES
NACHI Non Leak Type Solenoid Valve (SNH-G01 , SNH-G03 , SNH-G04 , SNH-G06) VALVES Image
  • Employment of poppet structure for minimum internal leakage
  • Highly reliable wet solenoid structure
  • Mounting surface complies with ISO standard. (01 and 03 size)
  • EC connector for enhanced switching capability (06 size)
NACHI DSS Type Solenoid Controlled Pilot Operated Directional Valve (DSS-G04) VALVES
NACHI DSS Type Solenoid Controlled Pilot Operated Directional Valve (DSS-G04) VALVES Image
  • Highly reliable structure in which wet solenoid valve SS-G01 is used as pilot valve
  • Compact size and switching capability for high pressure and large capacity
  • Terminal box type for easy wiring
  • Combination with modular valve enables easy construction of high-pressure, large-capacity circuits.
NACHI SK Series Wet Type Solenoid Operate Direction Control Valve VALVES
NACHI SK Series Wet Type Solenoid Operate Direction Control Valve VALVES Image
  • Highly waterproof
    JIS C 0920 IP67
    JIS D 0203 D2
  • High allowable back
    Pressure 21MPa
  • A surge-killer diode built-in type also available
  • Correspond to a wide variety of connector
NACHI SS Series Wet Type Solenoid Operated Direction Control Valve (G03) VALVES
NACHI SS Series Wet Type Solenoid Operated Direction Control Valve (G03) VALVES Image
  • Highly reliable wet solenoid Structure
  • Terminal box type for easy wiring
  • Waterproof and dustproof rank: JIS C 0920 IP64
  • Shockless type also available to prevent shock when switching
  • UL-recognized products available
NACHI SS Series Wet Type Solenoid Operated Direction Control Valve (G01) VALVES
NACHI SS Series Wet Type Solenoid Operated Direction Control Valve (G01) VALVES Image
  • Recognized by reliable overseas safety standards such as CE (Europe), UL (U.S.A.) and CSA (Canada).
  • The power consumption of the DC solenoid (D* and E*) is reduced. This will further promote your energy saving policy.
  • An innovative fluid reaction compensating mechanism assures reliable valve switching. (Patent pending)
  • An expanded wiring space ensures easy wiring.
SCW Series Solenoid Valve with Monitoring Switch (SCW-G03)
SCW Series Solenoid Valve with Monitoring Switch (SCW-G03) Image
  • It is a solenoid valve that monitors the direction switch position of the valve and possesses the function of outputting a signal.
  • It operates the switch directly with the valve operation so reliable output can be obtained.
  • It does not use magnetic sensors or proximity sensors so the temperature drift and hysteresis are smaller than before.
NACHI SA Series Wet type Solenoid Operated Direction Control Valve (G03) VALVES
NACHI SA Series Wet type Solenoid Operated Direction Control Valve (G03) VALVES Image
  • Highly reliable wet solenoid structure
  • DIN connector type for highly waterproof performance JIS C 0920 IP65
  • Shockless type also available to prevent shock when switching
  • Coil can rotate by 360°. Can be mounted even in a small space.
NACHI SAW Series Solenoid Valve with Monitoring Switch (SAW-G01) VALVES
NACHI SAW Series Solenoid Valve with Monitoring Switch (SAW-G01) VALVES Image
  • It is a solenoid valve that monitors the direction switch position of the valve and possesses the function of outputting a signal.
  • It operates the switch directly with the valve operation so reliable output can be obtained.
  • It does not use magnetic sensors or proximity sensors so the temperature drift and hysteresis are smaller than before.
NACHI Load Sensing Valve (DPK-T04 A/B Port) VALVES
NACHI Load Sensing Valve (DPK-T04 A/B Port) VALVES Image

Provides all functions required for mini excavator.
Anti-saturation function
Pressure compensation function according to self loaded pressure
Cooperative system with engine speed
No need for independent pump of swing motor
LS control + constant horsepower control
Good for straight traveling of wheel motors
Various kinds of attached valves

INDUSTRIAL OIL SKIMMERS
Ultra 360 Coolant Purification System
Ultra 360 Coolant Purification System Image

Coolant Purification Systems

Ultra 360

Keep coolant concentration on basic, To reduce floating oil on surface and prevent anaerobic bacteria and acidification of coolant. Solve the foul smell、Keep stable PH value、Save cost.

  • Oil reservoir capacity
  • Zero supplies
  • Patented technology – SKIMMER
  • Patented technology – S.T.P.M
  • Processing cycle
  • Small volume
  • Zero Power Consumption
Ultra 90 Coolant Purification Systems
Ultra 90 Coolant Purification Systems Image

Keep coolant concentration on basic, To reduce floating oil on surface and prevent anaerobic bacteria and acidization of coolant. Solve the foul smell、Keep stable PH value、Save cost.

Small volume
Easy integration for CNC
Standard Mini for configuration
Lower 50% of the cost, Extend life time for quintuple
Lower 15% of the cost, Lessen waste to promote high purification
Lower 15% of the cost, Increase Value of out-put
Higher 10% of Waste Oil Recycle, Promote Recycle Value

Ultra 1200 Coolant Purification Systems industrial oil skimmers
Ultra 1200 Coolant Purification Systems industrial oil skimmers Image

Ultra 1200 Coolant Purification Systems industrial oil skimmers
Keep coolant concentration on basic, To reduce floating oil on surface and prevent anaerobic bacteria and acidization of coolant. Solve the foul smell、Keep stable PH value、Save cost.

Focus on central processing system or raft foundation
Maximum – flow traffic

OIL FILTERS
M-Series (M30, M-50, M100, M300) RRR Oil Filter
M-Series (M30, M-50, M100, M300) RRR Oil Filter Image
M-SERIES – 3µ absolute – ß3 >929
Model M30 M50 M100 M300
Article nr. 20230 20330 20430 20520
Dimensions / mm Ø104 x H114 Ø143 x H114 Ø179 x H114 Ø303 x H114
Water capacity / cc 60 130 200 600
Oil cleaner system BU30E
SE30N-YT
BU50E
SE50N-YT
BU100/200/300E
SE100N-YT
SS100/200N-YT
OSCA AL-series
SU/SS102-*R
SU/SS103-*R
OSCA
SS305-*R
SS315-*R
SS321-*R

 

Taise Kogyo Off-line filter
Taise Kogyo Off-line filter Image
Model Design pressure (MPa) (MPa) 標準流量 Features
FP-400Y
12L/min Pump type, handy type
FP-750S
30L/min Pump type, portable type, 1 tube
FP-1500S-5060A
58L/min Pump type, portable type, 2 tubes
FP-1500S-1010
9L/min Pump type, portable type, centrifuge attached
Taise Kogyo Breather
Taise Kogyo Breather Image
Model Design pressure (MPa) (MPa) Inner diameter Features
AP
8A~150A Air breather
FAB
φ29,φ49 Fluid refill breather
FA
φ33,φ48.2 Fluid refill breather
FU
φ55,φ79 Fluid refill breather
Taise Kogyo Cartridge filter
Taise Kogyo Cartridge filter Image
Model Design pressure (MPa) (MPa) Inner diameter Features
CS
0~0.5 Rc1/2 Cartridge type
CF
0~0.5 Rc3/4,Rc1 Cartridge type
107
0~1 Rc1 1/4 Cartridge type
Taise Kogyo Return line filter
Taise Kogyo Return line filter Image
TRF
0~1 20A~80A Tank-top type
TR
0~1 Rc3/8,Rc1/2 Tank-top type, air breather attached
UR
0~1 20A~40A Tank-top type L type, upward extraction
Taise Kogyo Duplex filter
Taise Kogyo Duplex filter Image
Model Design pressure (MPa) (MPa) Inner diameter Features
0~0.5 25A~150A 2 tubes type, blow-off
0~0.5 25A~150A 2 tubes type
0~0.6 10A~50A 2 tubes type, blow-off
0~0.6 10A~50A 2 tubes type
0~2 15A~80A 2 tubes type, steel construction
Taise Kogyo VN VM ISH TSF Suction line filter
Taise Kogyo VN VM ISH TSF Suction line filter Image
Model Design pressure (MPa) (MPa) Inner diameter Features
VN
-0.1~0.5 10A~150A L type, upward extraction
VM
-0.1~0.5 10A~40A L type, upward extraction, magnet attached
ISH
-0.1~0.5 10A~80A L type, horizontal extraction
TSF
-0.1~0.5 20A~50A Tank-top type
WE,WS & OS- Series (WE-100,WS10,WS20,OS10) RRR Oil Filter
WE,WS & OS- Series (WE-100,WS10,WS20,OS10) RRR Oil Filter Image
WE-100 WS-series OS10
Model WE-100 WS10 WS20 OS10
Article nr. 20450 20101 / 20125 20201 / 20225 26500
Dimensions Ø179 x H114 Ø68 x H250 Ø68 x H500 Ø70 x H250
Water capacity / cc 900
Oil cleaner system BU100/200/300E
SE100N-YT
SS100/200N-YT
OSCA  AL-series
SU/SS102-*R
SU/SS103-*R
WS-WD
WS-WD-1PF10
OSCA
WS-SU103-1R
-3WS20
WS-SU103-2R
-6WS20
OSCA
OS-series
Features Water absorber

  • Media Material:Acrylic

Water separator

  • Separates water from oil, based on the coalescence principle.
  • 20101/20201:1μm
  • 20125/20225:25μm

Oil separator

  • Separates oil from water, based on the oalescence principle.

D & WG-series (D-100,D-300,WG-100,DWG-100) RRR Oil Filter
D & WG-series (D-100,D-300,WG-100,DWG-100) RRR Oil Filter Image
D-series – 3µm absolute – ß3 >458 WG-series (Water Glycol)
Model D-100 D-300 WG-100 DWG-100
Article nr. 20000 20515 25470 25480
Dimensions Ø179 x H114 Ø303 x H114 Ø179 x H114 Ø179 x H114
Water capacity / cc 400 1200 Nothing Nothing
Oil cleaner system BU100/200/300E
SE100N-YT
SS100/200N-YT
OSCA  AL-series
SU/SS102-*R
SU/SS103-*R
OSCA
SS305-*R
SS315-*R
SS321-*R
BU100/200/300EW
SE100NW-YT
SS100/200NW-YT
OSCA  AL100W-series
SU102W-*R
SU103W-*R
BU100/200/300EW
SE100NW-YT
SS100/200NW-YT
OSCA
AL100W-series
SU102W-*R
SU103W-*R
Element
Features

  • 2 stage build, with X-filter medium at the upper part and M-filter medium at the lower part. Separated by a non-woven disc, to protect the lower part in case of excessive water.
  • Media Material:Cellulose

  • 10µ and 5µ filter elements for water glycolfluids (WG).
  • The DWG100 has a 2 stage build separated by a non-woven disc, for additional particle removal.
  • Media Material:Polyester and Polypropylene
X-SERIES (X30,X50,X100-H114,X300-H114) RRR Oil Filter
X-SERIES (X30,X50,X100-H114,X300-H114) RRR Oil Filter Image
X-SERIES – 10µm absolute – ß10 >145
Model X30 X50 X100-H114 X300-H114
Article nr. TR-25250 TR-25350 TR-25450 TR-20512
Dimensions Ø104 x H114 Ø143 x H114 Ø179 x H114 Ø303 x H114
Water capacity / cc 60 130 200 600
Oil cleaner system BU30E
SE30N-YT
BU50E
SE50N-YT
BU100/200/300E
SE100N-YT
SS100/200N-YT
OSCA AL-series
SU/SS102-*R
SU/SS103-*R
OSCA
SS305-*R
SS315-*R
SS321-*R
Element
Features
Long life element.

Special cellulose element medium that allows higher dirt absorbing.

Perfect for high viscosity oil(VG220-320-460).

Media Material:Cellulose

E-SERIES(E30,E50,E100,E300) RRR Oil Filter
E-SERIES(E30,E50,E100,E300) RRR Oil Filter Image
E-SERIES – 5µ absolute – ß5 >539
Model E30 E50 E100 E300
Article nr. 20270 20370 20470 20510
Dimensions Ø104 x H114 Ø143 x H114 Ø179 x H114 Ø303 x H114
Water capacity / cc 60 130 200 600
Oil cleaner system BU30E
SE30N-YT
BU50E
SE50N-YT
BU100/200/300E
SE100N-YT
SS100/200N-YT
OSCA  AL-series
SU/SS102-*R
SU/SS103-*R
OSCA
SS305-*R
SS315-*R
SS321-*R
Element

 

Taise Kogyo Indicator
Taise Kogyo Indicator Image

Indicator, pressure gauge
Features

  • Devices that detect the inlet/outlet port differential pressures and signal visually and/or electronically that the filter element is clogged (some models only detect the oil inlet port pressure or outlet port pressure)
  • Micro capacity (100mA or less) is available.
  • O-rings and gasket is based on the fluids type. Please inquire about this.
Compatible models Model number System Red indication start All red indication Remarks
VN ID-02 Manual reset/Visual type 0.012MPa 0.02MPa Standard options
ED-02 Automatic reset・electric contact type 0.02MPa Visual signal DIN connector Code:IEC529(EN60529)IP65
ED-02D Automatic reset・micro capacity electric contact type
VM UG Visual type -100kPa~0kPa Pressure gauge type (Secondary pressure detection)
TSF EG-03 Automatic reset・electric contact type 0.03MPa Pressure switch type (Secondary pressure detection) DIN connector Code:IEC529(EN60529)IP65
EG-03D Automatic reset・micro capacity electric contact type
ISH U4-02 Manual reset/Visual type 0.02MPa Standard options
E4-02 Automatic reset・electric contact type 0.02MPa DIN connector Code:IEC529(EN60529)IP65
E4-02D Automatic reset・electric contact type
Indication (operation)pressure
Compatible models Model number System Red indication start All red indication Remarks
351/2 IA-3 Automatic reset/Visual type 0.2MPa 0.3MPa
UL,UM EA-3 Automatic reset・electric contact type 0.3MPa Visual signal DIN connector Code:IEC529(EN60529)IP65
TL EA-3D Automatic reset・micro capacity electric contact type
LCN
COS-L
COS-H
UR
107
*FP-1500A-1010
UH IF-3 Automatic reset/Visual type 0.2MPa 0.3MPa
TM IF-7 0.2MPa 0.7MPa For high pressure elements
3501/2 EF-3 Automatic reset・electric contact type 0.3MPa Visual signal DIN connector Code:IEC529(EN60529)IP65
SH EF-3D Automatic reset・micro capacity electric contact type
GM EF-7 Automatic reset・electric contact type 0.7MPa For high pressure elements Visual signal DIN connector Code:IEC529(EN60529)IP65
GF EF-7D Automatic reset・micro capacity electric contact type
4201
MVF
HYDRAULIC CYLINDERS
Taiyo Compact 100S-1 Series Image
Taiyo Compact 100S-1 Series
Bore sizes from 20mm to 100mm. Light weight, compact hydraulic cylinders with bodies constructed of a special aluminum alloy. Cost-effective selection is available based on frequency of operation and operation pressure.... Read More
TAIYO 140H-5 Series Hydraulic Cylinder Image
TAIYO 140H-5 Series Hydraulic Cylinder
High-performance cushion ● Double acting hydraulic cylinders for 7/14 MPa with bore from 32 mm to 250 mm. ● High-performance cushion reduces a shock at stroke-end. ● Newly designed cushion valve all... Read More
TAIYO 140H-6 Series Hydraulic Cylinder Image
TAIYO 140H-6 Series Hydraulic Cylinder
Taiyo 2TC40BN425-A0 140H-6 Hydraulic Tie Rod Cylinder 40mm Bore 425mm Stroke Brand: Taiyo... Read More
TAIYO 140H-7 Series Hydraulic Cylinder Image
TAIYO 140H-7 Series Hydraulic Cylinder
22mm. DIA. ROD (0.882″)     DOUBLE ACTING CYLINDER    FLANGE MOUNT
TAIYO 210H-3 Series Hydraulic Cylinder Image
TAIYO 210H-3 Series Hydraulic Cylinder
Discontinued product 21MPa Hydraulic Cylinder 210H-3 Series The regarding performance and installation dimension is governed by and construed under JOHS ... Read More
TAIYO 140M-3 Mill Type Hydraulic Cylinder Image
TAIYO 140M-3 Mill Type Hydraulic Cylinder
Special designed for heavy duty machinery such as steelmaking equipment. High-strength designed for resistes pressure surges, vibrations, and impact. High-performance cylinder which manufactured with great care regarding pro... Read More
TAIYO 35SY-1R Series Hydraulic Cylinder Image
TAIYO 35SY-1R Series Hydraulic Cylinder
3.5Mpa Compact Hydraulic Cylinder
TAIYO 70T-2 Series Telesscopic Hydraulic Cylinder Image
TAIYO 70T-2 Series Telesscopic Hydraulic Cylinder
7MPa Double-acting Non-constant Speed 2 Stage Telescopic Cylinder. 2-Stage Telescopic design offer space saving for vertical axis mounting. Fixed cushions are standard at both stroke end. Uniform circuit structure prov... Read More
TAIYO 70H-7 Series Hydraulic Cylinder Image
TAIYO 70H-7 Series Hydraulic Cylinder
7Mpa Double-acting Hydraulic Cylinder
TAIYO 70H-6 Series Hydraulic Cylinder Image
TAIYO 70H-6 Series Hydraulic Cylinder
7Mpa Double-acting Hydraulic Cylinder
Taiyo Compact 35S-1 Series Image
Taiyo Compact 35S-1 Series
Hydrogenated nitrile rubber is standardized for slipping parts packing material. Available in male and female rod ends. Square ring type piston packing is adopted. Easy maintenance design. ... Read More
Contact Us
Taiyo Compac HQS2 Series Image
Taiyo Compac HQS2 Series
Compact design and light weight which realized by applied Special Aluminum Alloy to the cylinder body. Enhanced your cost performance by selection depend on frequency of use and operating pressure. AX, AZ type switches are ... Read More
Taiyo Compact 210S-1 Series Image
Taiyo Compact 210S-1 Series
Industry-leading compact demensions comparing to equivalent products. Sufficient strength and high-performance verified by fatigue testing and endurance testing. Adopting the standard AX, AZ switch which is superior in maintenance... Read More
Taiyo Compact 160S-1 Series Image
Taiyo Compact 160S-1 Series
Operates up to 10 million times at a maximum of 16 Mpa Abrasion resistant hydrogenated nitrile rubber packing is standardized. Standard type cylinders are fully operable at ambient temperatures of up to 120 Celsius. Int... Read More
Taiyo 35Z Hydraulic Cylinder Image
Taiyo 35Z Hydraulic Cylinder
Action Style – Double-acting Single-rod/Basic Available Bores(mm) – φ20,φ25,φ32 Mounting Style – SD/LB/FA/FB/CA/CB Norminal Pressure – 3.5MPa Max. Working Pressure – 4MPa Proof Test Pressure –... Read More
Taiyo General Purpose 35H-3 Series Hydraulic Cylinder Image
Taiyo General Purpose 35H-3 Series Hydraulic Cylinder
Action Style – Double-acting Single-rod/Standard type Available bores(mm) – φ32/φ40/φ50/φ63/φ80/φ100/φ125/φ160 Mounting Style – SD/LA/LB/FA/FB/CA/CB/TA/TC Piston Seal – U-seal Slipper sea... Read More
Taiyo 100Z Series Hydraulic Cylinder Image
Taiyo 100Z Series Hydraulic Cylinder
Action Style – Double-acting Single-rod/Basic Available Bores(mm) – φ20,φ25,φ32 Mounting Style – SD/LB/FA/CA Norminal Pressure – 10MPa Max. Allowable Pressure – 12MPa Proof Test Pressure – 15M... Read More
Taiyo General Purpose 70H-8 Series Hydraulic Cylinder Image
Taiyo General Purpose 70H-8 Series Hydraulic Cylinder
The adoption of high-performance cushion has reduced the shock at stopping. The adoption of newly designed cushion valve allows easy cushion adjustment. The anti-coming-off structure and looseness-preventive lock nut have be... Read More
Taiyo General Purpose 100H-2 Series Hydraulic Cylinder Image
Taiyo General Purpose 100H-2 Series Hydraulic Cylinder
Designed to ISO 10762 cylinder.(Conforming to JIS B8367-5) Adoption of floating cushion allows smooth start. High-performance cushion. Packing grooves in sliding sections conform to ISO standards.
Taiyo General Purpose 140L-1 Series Hydraulic Cylinder Image
Taiyo General Purpose 140L-1 Series Hydraulic Cylinder
Available bore size φ63∼φ160 and stroke 200∼3000mm. Equipped with high-performance cushioning as standard. The adoption of newly designed cushion valve allows easy cushion adjustment. The anti-coming-off structu... Read More
TAIYO 70H-5 Series hydraulic cylinder Image
TAIYO 70H-5 Series hydraulic cylinder
Standard built-in highperformance cushion in hydraulic cylinders ● Double acting hydraulic cylinders for 7/14 MPa with a bore from φ32 to φ250. ● The adoption of high-performance cushion has redu... Read More
Direct Press DP Series Cylinder Image
Direct Press DP Series Cylinder
It could puncture round hole and square hole without any guide. The external size is samll, so it could saving space for lined up installation. It could setting the punch directly on the rod end. The length of stroke is... Read More
HYDRAULIC PUMPS
NACHI PVD Series Piston Hydraulic Pump Image
NACHI PVD Series Piston Hydraulic Pump
One pump discharges two equal amounts of flow to ensure shovel straightness. Constant horsepower control with full use of engine horsepower, resulting in increased speed and power for mother machine. Compact size enables inst... Read More
NACHI PVK Series Piston Pump Image
NACHI PVK Series Piston Pump
Constant horsepower control with full use of engine horsepower, resulting in increased speed and power for mother machine. Load sensing control can be achieved with our DPK load sensing valve, resulting in energy savings for mother... Read More
NACHI PZ Series Piston Hydraulic Pump Image
NACHI PZ Series Piston Hydraulic Pump
Half-cylindrical swash plate and 11 pistons for low noise and low pulsation Spherical valve plate for high efficiency (Employed into 3B, 4B and 6B.) Various capacities ranging from 35 to 220cm3/rev (7 sizes in tot... Read More
NACHI PVS Series Piston Hydraulic Pump Image
NACHI PVS Series Piston Hydraulic Pump
Half-cylindrical swash plate for low noise and low pulsation Rich set of options to enable highly efficient, energy-saving equipment.
NACHI PZS Series Piston Hydraulic Pump Image
NACHI PZS Series Piston Hydraulic Pump
Half-cylindrical swash plate and 11 pistons for low noise and low pulsation Spherical valve plate for high efficiency Multiple string option with our IPH series inscribed gear pump.
NACHI UVN Series Unipump Hydraulic Pump Image
NACHI UVN Series Unipump Hydraulic Pump
Enhanced hydraulic pump and electromotor efficiency for decreased electric consumption (Electric motor IE3 premium efficiency compatible) Compact size for space-saving unit design Original connection method between pump and ... Read More
NACHI Hydraulic Vane Pump Image
NACHI Hydraulic Vane Pump
The Nachi VDR series of vane pumps offer quick responsiveness and efficiency while operating at high pressures up to 14MPa. Nachi hydraulic components are known for precision construction, durability and ability to tolerate tough operati... Read More
HYDRAULIC VALVES
NACHI SE / SED-G01-40 SERIES VALVES Image
NACHI SE / SED-G01-40 SERIES VALVES
Realizes maximum working pressure, maximum flow, and allowed back pressure for the 5W class Maximum pressure – 16MPa Maximum flow  – 40L/min Permissible back pressure – 16MPa CE Approval W... Read More
G03 Modular Valve Series Image
G03 Modular Valve Series
High pressure and large capacity Maximum working pressure: 25,35 MPa Maximum flow: 100 L/min Stacking system and bolt detaching system allows circuits to be configured, changed and added easily and immediately. Co... Read More
NACHI G01 Modular Valve Series VALVES Image
NACHI G01 Modular Valve Series VALVES
High pressure and large capacity Maximum working pressure: 25,35 MPa Maximum flow: 50 L/min Stacking system and bolt detaching system allows circuits to be configured, changed and added easily and immediately. Com... Read More
NACHI Non Drain Type Pressure Switch Modular VALVES Image
NACHI Non Drain Type Pressure Switch Modular VALVES
No drain flow for energy-saving operation. Can achieve highly responsive, high-accuracy switch output. Long life for enhanced reliability With electric trimmer, pressure and hysteresis can be freely changed within adjus... Read More
NACHI SL Pressure Switch Modular VALVES Image
NACHI SL Pressure Switch Modular VALVES
Modular Valve with a switch that opens/closes electric circuits upon sensing a pressure change in hydraulic circuits. Built-in indicator light in DIN connector, which enables a visual check of operation. W type with both A an... Read More
NACHI SL Series Wet Solenoid Valve (SL-G01) VALVES Image
NACHI SL Series Wet Solenoid Valve (SL-G01) VALVES
Highly reliable wet solenoid structure. Terminal box type for easy wiring. It operates on the low power consumption of 10W. With the AC type, the total length of the valve is compactly designed. CE,UL,CSA certific... Read More
NACHI SE Series Low Power Solenoid Valve (SE-G01) VALVES Image
NACHI SE Series Low Power Solenoid Valve (SE-G01) VALVES
The amount of power consumed by solenoids has been extremely small. (DC24V:4.8w) They operate with a low electrical current so they can be driven directly with the output circuit of the PC (programmable controller). The... Read More
NACHI Non Leak Type Solenoid Valve (SNH-G01 , SNH-G03 , SNH-G04 , SNH-G06) VALVES Image
NACHI Non Leak Type Solenoid Valve (SNH-G01 , SNH-G03 , SNH-G04 , SNH-G06) VALVES
Employment of poppet structure for minimum internal leakage Highly reliable wet solenoid structure Mounting surface complies with ISO standard. (01 and 03 size) EC connector for enhanced switching capabil... Read More
NACHI DSS Type Solenoid Controlled Pilot Operated Directional Valve (DSS-G04) VALVES Image
NACHI DSS Type Solenoid Controlled Pilot Operated Directional Valve (DSS-G04) VALVES
Highly reliable structure in which wet solenoid valve SS-G01 is used as pilot valve Compact size and switching capability for high pressure and large capacity Terminal box type for easy wiring Combination... Read More
NACHI SK Series Wet Type Solenoid Operate Direction Control Valve VALVES Image
NACHI SK Series Wet Type Solenoid Operate Direction Control Valve VALVES
Highly waterproof JIS C 0920 IP67 JIS D 0203 D2 High allowable back Pressure 21MPa A surge-killer diode built-in type also available Correspond to a wide variety of connector
NACHI SS Series Wet Type Solenoid Operated Direction Control Valve (G03) VALVES Image
NACHI SS Series Wet Type Solenoid Operated Direction Control Valve (G03) VALVES
Highly reliable wet solenoid Structure Terminal box type for easy wiring Waterproof and dustproof rank: JIS C 0920 IP64 Shockless type also a... Read More
NACHI SS Series Wet Type Solenoid Operated Direction Control Valve (G01) VALVES Image
NACHI SS Series Wet Type Solenoid Operated Direction Control Valve (G01) VALVES
Recognized by reliable overseas safety standards such as CE (Europe), UL (U.S.A.) and CSA (Canada). The power consumption of the DC solenoid (D* and E*) is reduced. This will further promote your energy saving policy.... Read More
SCW Series Solenoid Valve with Monitoring Switch (SCW-G03) Image
SCW Series Solenoid Valve with Monitoring Switch (SCW-G03)
It is a solenoid valve that monitors the direction switch position of the valve and possesses the function of outputting a signal. It operates the switch directly with the valve operation so reliable output can be obtained... Read More
NACHI SA Series Wet type Solenoid Operated Direction Control Valve (G03) VALVES Image
NACHI SA Series Wet type Solenoid Operated Direction Control Valve (G03) VALVES
Highly reliable wet solenoid structure DIN connector type for highly waterproof performance JIS C 0920 IP65 Shockless type also available to prevent shock when switching Coil can rotate by 360°. Can be m... Read More
NACHI SAW Series Solenoid Valve with Monitoring Switch (SAW-G01) VALVES Image
NACHI SAW Series Solenoid Valve with Monitoring Switch (SAW-G01) VALVES
It is a solenoid valve that monitors the direction switch position of the valve and possesses the function of outputting a signal. It operates the switch directly with the valve operation so reliable output can be obtained... Read More
NACHI Load Sensing Valve (DPK-T04 A/B Port) VALVES Image
NACHI Load Sensing Valve (DPK-T04 A/B Port) VALVES
Provides all functions required for mini excavator. Anti-saturation function Pressure compensation function according to self loaded pressure Cooperative system with engine speed No need for independent pump of sw... Read More
INDUSTRIAL OIL SKIMMERS
Ultra 360 Coolant Purification System Image
Ultra 360 Coolant Purification System
Coolant Purification Systems Ultra 360 ... Read More
Ultra 90 Coolant Purification Systems Image
Ultra 90 Coolant Purification Systems
Keep coolant concentration on basic, To reduce floating oil on surface and prevent anaerobic bacteria and acidization of coolant. Solve the foul smell、Keep stable PH value、Save cost. Small volume Easy integration for CNC... Read More
Ultra 1200 Coolant Purification Systems industrial oil skimmers Image
Ultra 1200 Coolant Purification Systems industrial oil skimmers
Ultra 1200 Coolant Purification Systems industrial oil skimmers Keep coolant concentration on basic, To reduce floating oil on surface and prevent anaerobic bacteria and acidization of coolant. Solve the foul smell、Keep stable PH... Read More
OIL FILTERS
M-Series (M30, M-50, M100, M300) RRR Oil Filter Image
M-Series (M30, M-50, M100, M300) RRR Oil Filter
M-SERIES – 3µ absolute – ß3 >929 Model M30 M50... Read More
D & WG-series (D-100,D-300,WG-100,DWG-100) RRR Oil Filter Image
D & WG-series (D-100,D-300,WG-100,DWG-100) RRR Oil Filter
D-series – 3µm absolute – ß3 >458 WG-series (Water Glycol) Model ... Read More
X-SERIES (X30,X50,X100-H114,X300-H114) RRR Oil Filter Image
X-SERIES (X30,X50,X100-H114,X300-H114) RRR Oil Filter
X-SERIES – 10µm absolute – ß10 >145 Model X30 X50 ... Read More
E-SERIES(E30,E50,E100,E300) RRR Oil Filter Image
E-SERIES(E30,E50,E100,E300) RRR Oil Filter
E-SERIES – 5µ absolute – ß5 >539 Model E30 E50... Read More
Taise Kogyo Indicator Image
Taise Kogyo Indicator
Indicator, pressure gauge Features Devices that detect the inlet/outlet port differential pressures and signal visually and/or electronically that the filter element is clogged (some models on... Read More